日本内射一区二区三区-91麻豆一区二区三区-久久久精品二区三区-五月婷婷久久香蕉-日本高清二区视频

產品展示

當前位置:主頁 > 產品展示 > 奧地利E+E > 二氧化碳模塊 > 二氧化碳傳感器

二氧化碳傳感器

型號:EE894

產品時間:2024-10-17

產品資料:

簡要描述:

The EE894 module is ideal for demand controlled ventilation and building automation.EE894二氧化碳傳感器是按需控制通風和樓宇自動化的理想選擇。

詳細介紹

The EE894 module is ideal for demand controlled ventilation and building automation. It incorporates the E+E dual wavelength NDIR CO2 sensor,which compensates for ageing effects, is highly insensitive to pollution and offers outstanding long term stability. Beside CO2, the module measures also relative humidity (RH), temperature (T) and ambient pressure (p).

A multiple point CO2 and T factory adjustment procedure leads to excellent CO2 measurement accuracy over the entire T working range. The pressure compensation minimizes the impact of altitude and ambient pressure variations onto the CO2 measured data.

The measured data, with a range of up to 1% CO2, is available on the I2C or the E2 digital interface. The EE894 is available in two sizes and with electrical connection via contact pins and pads, which facilitate the design-in.

An optional kit for the E2 interface facilitates easy configuration of the module and the adjustment of the CO2, RH, T and pmeasurement. The CO2 measurement interval can be set according to the application requirements; by this the average current consumption can be reduced to 420 μA, ideal for battery-operated devices.

Typical Applications:

Demand controlled ventilation

Building automation

Data loggers and hand helds

Wireless transmitters

Key features:

Autocalibration

Outstanding long-term stability

Temperature and pressure compensated

Low power consumption

Small size

EE894二氧化碳傳感器是按需控制通風和樓宇自動化的理想選擇。它采用了E+E雙波長NDIR CO2傳感器,可補償老化效應,對污染高度不敏感,并提供出色的長期穩定性。除了二氧化碳,該模塊還測量相對濕度(RH)、溫度(T)和環境壓力(p)。

多點CO2和T工廠調整程序可在整個T工作范圍內實現出色的CO2測量精度。壓力補償將海拔和環境壓力變化對CO2測量數據的影響降至較低

可在I2C或E2數字接口上獲得測量數據,其范圍高達1%CO2。EE894有兩種尺寸可供選擇,并通過觸針和焊盤進行電氣連接,這有助于在中進行設計。

E2接口的可選套件有助于輕松配置模塊和調整CO2、RH、T和P測量。CO2測量間隔可根據應用要求設置;這樣,平均電流消耗可以降低到420μA,非常適合電池驅動設備。

典型應用:

按需控制通風

樓宇自動化

數據記錄器和手持設備

無線發射機

EE894二氧化碳傳感器主要特點:

自動校準

專業的長期穩定性

溫度和壓力補償

低功耗

小尺寸



 


產品咨詢

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

上一篇:OPL530

下一篇:OPB890T11Z

版權所有 © 2019 上海蒸鑫電子科技有限公司 滬ICP備14039699號-1 技術支持:化工儀器網 管理登陸 GoogleSitemap

在線客服 聯系方式 二維碼

服務熱線

86-021-64576299

掃一掃,關注我們